Skip to content
Fujitsu ASEG18KMTE wall-mounted air conditioner

Fujitsu · KM

Fujitsu ASEG18KMTE wall-mounted air conditioner

Heating
6.3 kW
Cooling
5.2 kW
SCOP
4.6A++
SEER
7.77A++
Noise from
29 dB(A)
Heats down to
-15 °C

Recommended for rooms of 36 to 52 m²

Price for cash or bank transfer
2,600 KM
Price for cards and card instalments
2,890 KM

Prices include VAT, not installation.

About the KM series

The KM series is a standard range of wall units focused on high efficiency, achieved with a lambda-shaped heat exchanger and a large fan. The indoor unit has an apple-catechin filter that captures fine particles and dust and an ion filter that breaks down odours. The outdoor unit has a quiet mode, and a special heating mode keeps an empty room from getting too cold. Phone control works through a Wi-Fi adapter, built in or optional depending on the model, and the series also includes models for larger rooms.

Certified heating data

Numbers from independent certification, not from advertising. Each row holds for the exact combination measured.

Eurovent · air to air

SCOP 4.6A++

Design load
4.8 kW
Rated heating capacity (+7 °C)
6.3 kW
At -7 °C, at least
4.25 kW
At -10 °C, at least
4.7 kW
Lowest temperature in the rating
-15 °C

For this climate the rating covers heating down to -15 °C, with measured output down to -10 °C; it is not the unit’s operating limit.

Measured combination: AOEG18KMTA/ASEG18KMTE

View the certificate

The rating tests the unit on an imaginary reference house. The design load is what that house needs at the design temperature (−10 °C in the average European climate), not the unit’s capacity; where the unit falls short of it, the rating assumes an electric backup heater covers the difference. The “at least” figures show what the unit delivered to that house at the stated temperature, not the most it can give.

According to the manufacturer, the unit heats down to an outdoor temperature of -15 °C.

Technical data

Cooling capacity (kW)5.2
Cooling range (kW)0.9 – 6
Heating capacity (kW)6.3
Heating range (kW)0.9 – 8.7
Energy class, coolingA++
Energy class, heatingA++
SEER7.77
SCOP4.6
Power input, cooling (W)1,390
Power input, heating (W)1,560
Indoor unit noise (dB(A))29 – 46
Outdoor unit noise (dB(A))50
Airflow (m³/h)980
RefrigerantR32
Refrigerant charge (kg)1.02
Pipe, liquid6.35 mm
Pipe, gas12.7 mm
Maximum pipe length (m)25
Maximum height difference (m)20
Power supply230 V / 1 f / 50 Hz
Indoor unit, W × H × D (mm)980 × 280 × 240
Outdoor unit, W × H × D (mm)799 × 632 × 290
Indoor unit weight (kg)12.5
Outdoor unit weight (kg)36
Heats down to outdoor (°C)-15

Manufacturer's data.

The set consists of

Documents

They open on the manufacturer's site.

Also known as: ASHG18KMTE

Earlier codes of the same unit: ASYG18KMTE

Similar products