Skip to content
Fujitsu WOYA080KLT outdoor unit

Fujitsu · Waterstage Comfort

Fujitsu WOYA080KLT single-phase outdoor unit

Heats down to
-20 °C

Price on request

About the Waterstage Comfort series

The Waterstage Comfort series is a split air-to-water heat pump with a wall-mounted hydraulic module, for heating through underfloor heating or radiators. With an optional tank it also prepares domestic hot water, and the hydraulic module has a built-in backup electric heater. The controller sets the water temperature from a heating curve and the outdoor temperature, and with an optional kit it controls a lower and a higher temperature circuit separately, for example underfloor heating and radiators.

Heating capacity by outdoor temperature

The manufacturer's data from the design & technical manual: the maximum heating capacity at the outdoor temperature and the water temperature of the system. The calculator chooses a model by this table; the certified data above is what was measured independently.

OutdoorWater 35 °CWater 45 °CWater 55 °C
−20 °C3.97 kW––
−15 °C6.01 kW5.68 kW–
−10 °C7.11 kW6.71 kW5.33 kW
−7 °C7.05 kW6.67 kW5.85 kW
−5 °C7.45 kW7.04 kW6.19 kW
0 °C8.23 kW7.78 kW7.05 kW
7 °C9.64 kW9.12 kW8.22 kW

Source: Fujitsu General, Design & Technical Manual, heating capacity table. Open the manual

Technical data

RefrigerantR32
Refrigerant charge (kg)1.02
Pipe, liquid6.35 mm
Pipe, gas12.70 mm
Maximum pipe length (m)30
Maximum height difference (m)20
Power supply230 V / 1 f / 50 Hz
Outdoor unit, W × H × D (mm)820 × 716 × 315
Outdoor unit weight (kg)42
Heats down to outdoor (°C)-20

Manufacturer's data.

Documents

They open on the manufacturer's site.

Also known as: WOHA080KLT

Similar products