Skip to content
Fujitsu WOYA100KLT outdoor unit

Fujitsu · Waterstage Comfort

Fujitsu WOYA100KLT single-phase outdoor unit

Heats down to
-20 °C

Price on request

About the Waterstage Comfort series

The Waterstage Comfort series is a split air-to-water heat pump with a wall-mounted hydraulic module, for heating through underfloor heating or radiators. With an optional tank it also prepares domestic hot water, and the hydraulic module has a built-in backup electric heater. The controller sets the water temperature from a heating curve and the outdoor temperature, and with an optional kit it controls a lower and a higher temperature circuit separately, for example underfloor heating and radiators.

Heating capacity by outdoor temperature

The manufacturer's data from the design & technical manual: the maximum heating capacity at the outdoor temperature and the water temperature of the system. The calculator chooses a model by this table; the certified data above is what was measured independently.

OutdoorWater 35 °CWater 45 °CWater 55 °C
−20 °C6.34 kW––
−15 °C8.29 kW7.5 kW–
−10 °C9.45 kW9.19 kW7.1 kW
−7 °C10.4 kW10.09 kW8 kW
−5 °C11.01 kW10.55 kW8.43 kW
0 °C12.52 kW11.74 kW9.52 kW
7 °C15.29 kW12.7 kW10.22 kW

Source: Fujitsu General, Design & Technical Manual, heating capacity table. Open the manual

Technical data

RefrigerantR32
Refrigerant charge (kg)1.63
Pipe, liquid9.52 mm
Pipe, gas15.88 mm
Maximum pipe length (m)30
Maximum height difference (m)20
Power supply230 V / 1 f / 50 Hz
Outdoor unit, W × H × D (mm)940 × 998 × 320
Outdoor unit weight (kg)62
Heats down to outdoor (°C)-20

Manufacturer's data.

Documents

They open on the manufacturer's site.

Also known as: WOHA100KLT

Similar products