Skip to content
Fujitsu WOYK160LCTA three-phase outdoor unit

Fujitsu · Waterstage High Power

Fujitsu WOYK160LCTA three-phase outdoor unit

Heats down to
-25 °C

Price on request

About the Waterstage High Power series

The Waterstage High Power series is a split air-to-water heat pump for underfloor or radiator heating and domestic hot water. The hydraulic module is wall-mounted and prepares domestic hot water with an optional separate tank. According to the manufacturer, it holds a high flow temperature without the backup heater even at very low outdoor temperatures, and it recommends the series for new builds and renovations alike. Control follows a heating curve, and if the outdoor unit fails, the built-in backup heater or a connected boiler takes over.

Heating capacity by outdoor temperature

The manufacturer's data from the design & technical manual: the maximum heating capacity at the outdoor temperature and the water temperature of the system. The calculator chooses a model by this table; the certified data above is what was measured independently.

OutdoorWater 35 °CWater 45 °CWater 55 °C
−20 °C10.1 kW10.49 kW9.35 kW
−15 °C12.16 kW11.8 kW10.48 kW
−10 °C13 kW12.11 kW10.81 kW
−7 °C13.5 kW12.3 kW11 kW
−5 °C13.5 kW12.4 kW11.28 kW
0 °C13.5 kW12.65 kW11.96 kW
7 °C15.17 kW12.75 kW12.24 kW

Source: Fujitsu General, Design & Technical Manual, heating capacity table. Open the manual

Technical data

RefrigerantR410A
Refrigerant charge (kg)2.5
Pipe, liquid9.52 mm
Pipe, gas15.88 mm
Maximum pipe length (m)20
Maximum height difference (m)15
Outdoor unit, W × H × D (mm)900 × 1,290 × 330
Outdoor unit weight (kg)99
Heats down to outdoor (°C)-25

Manufacturer's data.

Documents

They open on the manufacturer's site.

Also known as: WOHK160LCTA

Similar products