Fujitsu · Waterstage DHW High Power
Fujitsu WGYK160DG9 three-phase hydraulic module with an integrated 190 l hot water tank
- Water up to
- 60 °C
Price on request
About the Waterstage DHW High Power series
The Waterstage DHW High Power series is a split air-to-water heat pump whose hydraulic module has a built-in 190-litre domestic hot water tank, for underfloor or radiator heating. According to the manufacturer, it holds a high flow temperature without the backup heater even at very low outdoor temperatures, and it recommends the series for new builds and renovations alike. Control follows a heating curve, and if the outdoor unit fails, the built-in backup heater or a connected boiler takes over.
Technical data
| Pipe, liquid | 9.52 mm |
|---|---|
| Pipe, gas | 15.88 mm |
| Indoor unit, W × H × D (mm) | 648 × 1,840 × 698 |
| Indoor unit weight (kg) | 152 |
| Maximum water temperature (°C) | 60 |
| Domestic hot water tank (l) | 190 |
Manufacturer's data.
Connects to outdoor units
Documents
They open on the manufacturer's site.
Similar products
Waterstage Comfort
Fujitsu WSYA080ML3/WOYA080KLT single-phase air-to-water heat pump
- Heating
- 7.5 kW
- SCOP (55 °C)
- 3.28
- Energy class (35 °C)
- A+++
8,300 KM cash price, incl. VAT
Waterstage Comfort
Fujitsu WSYA100ML3/WOYA100KLT single-phase air-to-water heat pump
- Heating
- 9.5 kW
- SCOP (55 °C)
- 3.33
- Energy class (35 °C)
- A+++
9,500 KM cash price, incl. VAT
Waterstage DHW High Power
Fujitsu WGYK160DG9/WOYK112LCTA three-phase air-to-water heat pump with an integrated 190 l hot water tank
- Heating
- 10.8 kW
- Energy class (35 °C)
- A++
- Water up to
- 60 °C
14,000 KM cash price, incl. VAT